Conveyor Frames

A 3000 series 2 Roll trough set is used on a conveyor system were a uniform vee shape is required in the belt-form on the load side of the conveyor system.

The inline configuration of the rollers on the frame allows for a multi-direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required, matched to suit a customer's existing conveyor structure.

A 1000 series Cantilever 3 roll trough set is used on a conveyor system where a light load and uniform trough shape is required in the belt-form on the load side of the conveyor system.

The offset configuration of the rollers on the frame allows for a single direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required, matched to suit a customer's existing conveyor structure.

A 1500 series 2 Roll Steel Trough Set (Inline) is used on a conveyor system where a uniform vee shape is required in the belt-form on the load side of the conveyor system.

The inline configuration of the rollers on the frame allows for a multi-direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required, matched to suit a customer's existing conveyor structure.

A Trough Impact (Offset) assembly is used on a conveyor system where a uniform impact trough shape is required in the belt-form on the load side of the conveyor system.

The offset configuration of the rollers on the frame allows for a single direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required to match a customer's existing conveyor structure.

A Trough Impact (Inline) assembly is used on a conveyor system where a uniform impact trough shape is required in the belt-form on the load side of the conveyor system.

A Trough Trainer (Inline) is used on the load side of the conveyor and can be supplied as a fully fitted unit ready to be bolted as a complete structure to the conveyor frame.

A Picking Set Steel (Inline) is used on the load side of the conveyor belt where a transition is required in belt-form between flat and the trough along a section of the conveyor belt.

This style of frame can be also used consistently along the belt to form a predominately flat belt layout along the conveyor frame with only a small trough formed on the very edges of the belt width to prevent loss of product from the belt.

A Picking Set Steel (Offset) is used on the load side of the conveyor belt where a transition is required in belt-form between flat and the trough along a section of the conveyor belt.

This style of frame can be also used consistently along the belt to form a predominately flat belt layout along the conveyor frame with only a small trough formed on the very edges of the belt width to prevent loss of product from the belt.

A Picking Set Impact (Offset) is used on the load side of the conveyor belt where a shock load is apparent and a transition is required in belt-form between flat and the trough along a section of the conveyor belt.

This style of frame can be also used consistently along the belt to form a predominately flat belt layout along the conveyor frame with only a small trough formed on the very edges of the belt width to prevent loss of product from the belt. As an offset frame structure the picking set can be used on a single directional belt layout.