Transition Frame Steel Offset
A Transition Frame Steel (Offset) assembly is used on conveyor systems were an adjustable angle shape is required in the belt, while operating under an uniform load configuration.
A Transition Frame Steel (Offset) assembly is used on conveyor systems were an adjustable angle shape is required in the belt, while operating under an uniform load configuration.
A Transition Frame Impact (Offset) assembly is used on conveyor systems were an adjustable angle shape is required in the belt, while operating under an impact load configuration.
A Steel Trough Set (Offset) assembly is used on a conveyor system were a uniform trough shape is required in the belt form on the load side of the conveyor system.
Retractable Trough Frames are used where a customer needs to remove a complete trough frame assembly from their conveyor structure without the requirement of having to remove the belt or break the belt to extract the frame.
Trough Frames as a separate item can be supplied individually without rollers if required by our customers.
The frames are a solid steel fabricated construction and can be built in a range of sizes and material thicknesses to support a customer's specific belt load requirements. The trough frames can be supplied in either an Inline or offset configuration with the angle of the two wing rollers set to the customers’ requirements to suit their belt width. The trough frame mounting bolt hole centres can be configured to match a customer's existing conveyor structure.
A Steel Trough Set (Inline) assembly is used on a conveyor system where a uniform trough shape is required in the belt-form on the load side of the conveyor system.
The inline configuration of the rollers on the frame allows for a multi-direction operation of the belt on the conveyor system. The overall width of the trough frame can be constructed in a range of roller angles to suit all belt widths and the corresponding frame mounting bolt hole centres required, matched to a customer's existing conveyor structure.
A Steel Trough Set (Offset) assembly is used on a conveyor system were a uniform trough shape is required in the belt form on the load side of the conveyor system.
Vee Return assembly are used on a conveyor systems where a vee shape is required in the belt form on the return side of the conveyor system.
The structure of the steel frame can be built to any vee angle required by the customer. The overall width of the vee frame can be constructed to suit all belt widths and the corresponding mounting bolt hole centres required, matched to suit a customer's existing conveyor frame.
DRC offer our customers a full range of Australian built Rubber Disc Impact rollers and Rubber Disc Return rollers, built to their specifications and sizing utilising quality materials and components.
The DRC Impact and Rubber Disc Return roller range is constructed using a machined heavy gauge internal mounting pipe fitted with a set of heavy interference fit impact rubbers to suit the belt width length requested. DRC hold an extensive stock range of the most commonly requested sized rubber disc inserts for the build of the Impact and Rubber Disc Return rollers.
DRC offer our customers a full range of Australian made steel conveyor rollers, built to their specifications and sizing utilising quality materials and components.