Conveyor Equipment

The third style of Tail Pulley styles DRC traditionally offer is the ribbed or finned style unit.

DRC Slatted Tail Pulleys are constructed completely to our customer's sizing and operational specifications. 

Slatted Pulleys are supplied as a rib structure configuration with either steel round bar or steel flat bars used as the materials to form the outer rim diameter of the pulley structure. This style of pulley is predominately used to assist with cleaning and dislodging product from the belt surface and allowing light grade product to move through the pulley body structure without becoming permanently lodged within the structure.

The 5000 series Bottom Side Guide roller assembly, complete with its mounting bracket are used at various positions mounted along the internal face of a conveyor frame to assist with aligning and guiding of the belt along the return run rollers. The main roller mounting bracket is manufactured from heavy gauge steel fully formed through punching and pressing operations to obtain the mounting shape and shaft locking features required.

The 9000 series Bottom Side Guide roller assembly, complete with its mounting bracket are used at various positions mounted along the underside of a conveyor frame to assist with aligning and guiding of the belt along the return run rollers. The main roller mounting bracket and guide roller assembly fastener are all supplied in a hot dipped galvanised condition to prevent corrosion.

The guide roller is available to match in a variable range of sizes and lengths to suit each customer's specific belt needs.

The 1000 series Return Brackets are used on a conveyor structure to securely mount each end of a return roller or idler shaft to the underside of a conveyor frame.

The brackets are supplied from a single piece heavy gauge steel fully formed through punching and pressing operations to obtain the mounting shape, and shaft locking features required. The brackets are designed so that a return idler shaft can be either re-installed or removed from the conveyor assembly without the need to unbolt or remove the mounting brackets.

The 9000 series Carry Brackets are used on a conveyor structure to securely mount each end of an idler shaft roller to the load side of a conveyor frame.

The brackets are supplied from a single piece heavy gauge steel fully formed through punching and pressing operations to obtain the mounting shape, and shaft locking features required. The brackets are designed so that an idler shaft roller can be either re-installed or removed from the conveyor assembly without the need to unbolt or remove the mounting brackets.

The 9000 series Return Brackets are used on a conveyor structure to securely mount each end of a return roller or idler shaft to the underside of a conveyor frame.

The brackets are supplied from a single piece heavy gauge steel fully formed through punching and pressing operations to obtain the mounting shape, and shaft locking features required. The brackets are designed so that a return idler shaft can be either re-installed or removed from the conveyor assembly without the need to unbolt or remove the mounting brackets.

Frame Clamp Gide Roller assemblies are used to add a belt guiding support feature to an existing standard trough frame roller structure that has been identified as needed additional belt guidance support.

Frame Clamp Gide Roller assemblies are used to add a belt guiding support feature to an existing standard trough frame roller structure that has been identified as needed additional belt guidance support.

Take Up Assemblies are used on conveyor systems to mount a tail pulley or take up pulley unit into the belt system. The Take-Up assembly allows for a large range of controlled lateral adjustment to finally positioning the pulley so to adjust out the unwanted slack in the conveyor belt and provide the required operating tension.